Our Calibration Facilities

With 12 modern Gamma and X-ray irradiation facilities in full operation, the PTW Calibration Lab is one the largest and best equipped SSDL calibration laboratories worldwide.

 

Rely on the services of a trusted, accredited partner.

 

  • Quantity: 2
  • Use:
    • Calibration and quality control tests of ionization chambers, detectors, detector arrays
    • Routine consistency checks
  • Measuring quantities: Dw, Ka, Js, H*(10)
  • Main application: Radiation Therapy
  • Typical calibration objects:
    • PTW Farmer ionization chamber T30013
    • PTW Semiflex ionization chamber T31021
    • PTW PinPoint 3D ionization chamber T31022

 

  • Quantity: 2
  • Use: Calibration and quality control tests of ionization chambers and detectors
  • Measuring quantities: Dw, Ka, Js, H*(10)
  • Main application: Radiation Protection
  • Typical calibration objects: 30 cm³ spherical ionization chamber, 1000 cm³ spherical ionization chamber, 10000 cm³ spherical ionization chamber
  • Multiple sources for a wide range of dose rates

 

  • Quantity: 2 
  • Use: Calibration and quality control tests of ionization chambers and detectors
  • Measuring quantities: Dw, Ka, Js, H*(10)
  • Radiation qualities: 10 - 300 kV
  • Main applications: Radiation Therapy, Radiation Protection
  • Typical calibration objects:
    • Soft X-ray chamber
    • Spherical ionization chamber

 

  • Quantity: 1 
  • Use: Calibration and quality control tests of ionization chambers and detectors
  • Measuring quantities: Dw, Ka, Js, H*(10)
  • Radiation qualities: 10 – 160 kV
  • Main application: Diagnostic Imaging
  • Typical calibration objects:
    • DIADOS dosemeter
    • SFD ionization chamber

 

  • Quantity: 2
  • Use:
    • Calibration and quality control tests of ionization chambers and detectors
    • kV calibration
  • Measuring quantities: Ka, Js
  • Radiation qualitites: 40 - 150 kV
  • Main application: Diagnostic Imaging
  • Typical calibration objects:
    • NOMEX® Multimeter
    • DIADOS dosemeter
    • CT chamber

 

  • Quantity: 3
  • Use:
    • Calibration and quality control tests of ionization chambers and detectors
    • kV calibration
  • Measuring quantities: Ka, Js
  • Radiation qualitities: 20 – 49 kV
  • Main application: Diagnostic Imaging
  • Typical calibration objects:
    • DIADOS dosemeter
    • SFD ionization chamber

 

READ
CALIBRATION
GUIDE

CHECK OUR
FAQ SECTION

ASK FOR A
QUOTE

REQUEST
SERVICE

CALIBRATION LAB - OVERVIEW  CALIBRATION LAB - ACCREDITATIONS  CALIBRATION LAB - SERVICES

Diese Seite existiert auch in Ihrer Sprache.
This page also exists in your language.
Sprache wechseln Change Language